One of the preferred methods used by businesses who use Clevershare USBs & application with guests, is to have the wireless used by the Clevershare USB be the main connection point to use the app.
For example, the white USB which is included with the Clevershare USBs is connected to the Android module. The Android module generates a wireless hotspot which can be used with the Clevershare USB via the pairing method.
This wireless network can also be accessed by anyone in the room, as long as they know the password for the SSID. This can then be shown on a piece of card in the meeting room the Clevertouch is situated (as an example).
This wireless hotspot is customisable, using the instructions below:
- Go to the settings app
- Go to "More..."
- Go to "Wireless hotspot"
On some screens, the wireless hotspot will appear in the network section where "WiFi" and "Ethernet" can be found.
From here, the SSID is configurable, along with the password. We would recommend the GHz be changed to 2.4 to make sure that all devices can see the SSID being broadcast.
You can also change the password.
The next step to do is to apply the settings, and then re-pair the Clevershare with the Clevertouch screen.
From here, the Clevershare should now connect using the new SSID and password.
Then the guests can also connect to the same SSID to use the Clevershare app also.
We recommend that for every Clevertouch you set up in this way, that they have different SSIDs, so the Clevershare USBs, and the guests trying to connect to the screen can find the correct screen.
If you have issues with setting this up of this, we would highly recommend you log a case with the support team.